Men’s briefs with built in cockring.

Men’s briefs with built in cockring.

Still working on the built-in cockring brief build.

This version is a circle sew in the middle of the panel, two layers then turned out. Then an elastic band inserted in the seam allowance.

It came ok, still need to come up with a better technique for his make fo underwear.

Did the first test on woven fabric (brown/purple), then some yellow teeshirt material. The tee shirt fabric has a good stretch in one way, but very little on another way.

cut out the center and snipped the raw edges then turned it out and pressed flat. Lots of snipping.
cut out the center and snipped the raw edges then turned it out and pressed flat.
Lots of snipping.
The other side
The other side
Did some top stitching, a craft clip for size scale.
Did some top stitching, a craft clip for size scale.
Marked circle on tee shirt fabric.
Marked circle on tee shirt fabric.
Used the lighting bolt stretch stitch.
Used the lighting bolt stretch stitch.
The circle is sewn. could use a circular attachment to my machine, would help a lot with this.
The circle is sewn. could use a circular attachment to my machine, would help a lot with this.
Cut out center
Cut out center
snipped the edges, was going to use this silicone band, it is too bulky for this build.
snipped the edges, was going to use this silicone band, it is too bulky for this build.
Turning it out.
Turning it out.
Turned out and finger pressed flat, no ripples or puckers.
Turned out and finger pressed flat, no ripples or puckers.
one row of topstitching.
one row of topstitching.
inserting some elastic in the seam allowances area.
inserting some elastic in the seam allowances area.
Pulled it a bit tight and just tied it off. Kinda ugly looking, do to tee shirt fabric.
Pulled it a bit tight and just tied it off.
Kinda ugly looking, do to tee shirt fabric.
Size of the hole with no stretch.
Size of the hole with no stretch.
Size of the hole with some stretch, not to the max. about 80% to max.
Size of the hole with some stretch, not to the max. about 80% to max.

Leave a Reply

%d bloggers like this: